Toggle menu
Get CoverageRequest Call Back

General Security

Tailgating Prevention: A Layered Plan for NJ Properties

15 min readGuardEX
In this article

Tailgating is best prevented with layers, not one device: a clear entry rule, access control that matches the risk at each door, cameras that record who actually came through, and a trained person who enforces the rule. For most New Jersey properties, that person is a guard or officer posted where the traffic is. Hardware sets the rule. People make it hold on a busy Monday morning. A site-specific plan decides how much of each you need, and GuardEX builds security plans around each property’s own risks and operations.

This guide is for property managers and business owners running offices, warehouses, schools, construction sites, plants and gated communities. It covers how tailgating happens, what each control does, how a mantrap compares with a turnstile, and how to put the layers in order.

Key Takeaways

  • Tailgating, also called piggybacking, is an unauthorized person following an authorized one through a controlled entry. It usually works because people are polite, not because a lock failed.
  • Policy and training come first, but a rule that depends on courtesy being overcome by individual employees will fail at peak hours. Pair it with hardware and a staffed entry point.
  • A turnstile, a mantrap and a guard answer different questions: deter, detect or prevent. Pick by the risk at each door, not one product for the whole site.
  • Entrances built only to deter need supervision. Budget for the staffing that goes with them.
  • Treat the plan as general guidance. No control guarantees prevention, and local codes, fire egress and insurance terms need their own review.

What tailgating is and how it happens

Tailgating means an unauthorized person gets into a secured area by following someone who is authorized. The person with credentials opens the door, and the second person walks in behind them. The University of Florida’s information security team lists the common techniques: following someone in, claiming to be a delivery person, carrying large items so the door gets held, saying an ID was forgotten, claiming an employee invited them, or posing as custodial staff.

None of these require force or technical skill. They work because most people hold a door for someone with full hands. That is also why “be more careful” is not a plan.

For property managers, the same pattern shows up in different places:

  • Office and commercial lobbies: a visitor follows a tenant past the reception desk.
  • Schools: an adult enters behind a parent or staff member during drop-off, before anyone has verified them.
  • Warehouses and distribution centers: a person walks in through a dock door or employee entrance while it is propped open or while a driver is checking in.
  • Gated communities: a second vehicle follows a resident through the gate before it closes.
  • Construction sites: someone enters behind a delivery truck during a busy material drop.
  • Plants and manufacturing: a person without safety training follows a worker onto a production floor.

Some of these are vehicle entries rather than doors, so the controls differ. Our guide to truck gate security covers checks, records and staffing for that case.

Why it matters to a property manager

The core problem is accountability. If you cannot tell who is inside a building, you cannot control what they can reach. A Boon Edam piece from 2026 frames that uncertainty as a bigger risk than any single breach, and the point holds regardless of who is making it: a door log that shows one badge swipe says nothing about how many people walked through.

The practical consequences are ordinary ones. Theft of tools, inventory or equipment. Unauthorized people in areas where they have no training or are not covered by your safety program. Disputes after an incident, when your records show one person entering and your camera shows two. We do not promise that any measure prevents these events, but tracking and controlling who enters is how you reduce exposure to them.

Step 1: Map your entry points before you buy anything

Before choosing controls, list every way into the building or site and note what actually happens there. A walk-through at opening time, lunch, shift change and close tells you more than a floor plan does.

For each entry point, write down:

  1. Who uses it and when. Employees, tenants, visitors, drivers, contractors, students.
  2. How many people pass at peak. A door with six people an hour needs a different answer than one with two hundred.
  3. What happens if the wrong person enters. An unlocked storage area, a classroom corridor and a server closet carry different consequences.
  4. Where doors get propped open. Smoking areas, loading docks, back stairwells and kitchen doors are common.
  5. What watches the entrance. A camera, a person, nothing.
  6. Fire and life-safety constraints. Exit routes must remain usable. Confirm any change with your local fire official and your code consultant before installing anything.

This is the same discipline as a formal security site assessment, and it is the starting point for a plan that is specific to your property rather than copied from a template.

Step 2: Set a clear entry rule and train people on it

Policy is the cheapest layer and the first to fail without reinforcement. A usable rule is short:

  • Everyone badges in individually, every time.
  • Nobody holds a door for someone they cannot identify, even a colleague they recognize if the door is a controlled one.
  • Visitors go to reception or the visitor entry point and are escorted or badged.
  • Anyone without a badge is directed to the main entrance, politely and the same way each time.

The University of Florida advises staff who see an unknown person trying to enter a secured area to avoid direct contact and use a different entrance where possible, then report it. For your staff, make the reporting path concrete: who to call, what to say, and who responds.

Training works better when it gives people a script. “I can’t let you in this way, the front desk will help you” removes the social awkwardness that tailgaters rely on. A 2022 Security Info Watch article on tailgating recommends anti-tailgating policies and training for both employees and contractors, and contractors are easy to forget. Delivery companies, cleaning crews and tradespeople come through your doors every week.

Training alone will not hold at peak times. People under time pressure revert to habit. That is the reason for the next layers.

Step 3: Match the access control to the risk at each door

Access control decides who may enter. Anti-tailgating hardware and software decide whether only one person enters per credential. A 2023 Security Magazine article on layered entrances sorts entrance types into three goals: prevent, detect or deter. That framing is useful for any property.

Goal What it does Typical examples Needs staffing?
Deter Makes tailgating visible and awkward Door position, signage, a visible guard, full-height turnstile Yes, supervision matters
Detect Notices a second person and raises an alert Video analytics, optical sensors at a lobby entry Someone must respond
Prevent Physically allows one person at a time Mantrap portal, security revolving door Less, depending on design

The same article warns that entrances designed only to deter cannot stop a piggybacking incident alone and require manned supervision. It adds that management that deploys a supervised entrance without staffing it could be held liable if an incident follows from that gap. That is a reason to budget for staffing with the hardware, not after it.

Video analytics and alerts

Modern video systems can count the people who pass each time a badge is read. The 2022 Security Info Watch article describes AI video analytics that count unique individuals per badge swipe and send real-time alerts, including automated emails to the cardholder with the time, door and a video clip. A detection layer like this turns a missed event into a documented one, and a manager can then coach the individual instead of guessing. Detection is only useful if someone looks at the alerts. If your site has no one watching, remote monitoring can be that person.

Doors, gates and propped openings

Many tailgating events are really door-management problems. A door that is held open for a delivery, wedged for a smoke break or slow to close gives anyone a free pass. Door-held-open alarms, self-closing hardware and a clear delivery procedure fix more than most expensive equipment. Our commercial door security guide walks through those basics for New Jersey properties.

For vehicle gates, the same logic applies: a gate that stays open too long lets a second vehicle through. If you manage a community or industrial yard, see our notes on front gate security and gate security services.

Mantrap vs turnstile: how to choose

These two come up together because both control one-at-a-time entry, but they solve different problems.

Turnstiles

A turnstile lets one person through per valid credential and keeps people moving. It suits places with steady traffic where you want an orderly flow: a lobby, a parking structure entry or an employee entrance.

Security Magazine’s 2022 layered-entrance article recommends full-height turnstiles at the outer perimeter or parking structure because they cannot be jumped and mechanically allow one rotation per credential. The same article notes that two small people can squeeze through one compartment with no sensor or alarm. So a full-height turnstile is a strong deterrent, and it performs best when someone can see the entrance.

Waist-high or optical turnstiles are more common in lobbies. They are quicker and more open, and they detect more than they stop. Staff or a guard at the desk completes the control.

Mantraps

A mantrap is a small compartment with two interlocked doors. The second door will not open until the first has closed and latched. In a school, the idea appears in a secure visitor entry. A 2023 PASSK-12 design guide recommends verifying visitors by intercom or video doorbell while they are still outside, with cameras covering the approach, the vestibule and the space beyond. The doors are linked so that if the first is breached, staff can still deny entry at the second.

Interlocked doors in a secure school visitor vestibule

Mantraps cost more, take more space and move fewer people per minute, so they belong where the consequence of a wrong entry is high and traffic is manageable: a school main entrance, a records room, a pharmacy storage area or a data room.

Side-by-side comparison

Question Turnstile Mantrap
Main goal Control flow, one person per credential Verify and isolate one person at a time
Best for High-traffic entries, perimeter, lobbies Sensitive rooms, visitor vestibules, school entries
Speed Faster Slower
Footprint Smaller Larger, needs a vestibule
Where it can fail Two people squeezing through, jumping in lower models Slow throughput leads staff to hold or bypass doors
Staffing Better with an observer Better when staff can verify and release the second door

A useful rule: pick a turnstile where you need to keep people moving and a mantrap where you need to be sure about who is moving. In both cases, accessibility and egress rules apply. Check with the local code official before you commit, since requirements for accessible routes and emergency exit differ by building type.

The 2022 Security Magazine article also describes security revolving doors for employee-only entrances: they can prevent tailgating without slowing traffic during morning, lunch and evening peaks. For a plant or large office with a single dominant staff entrance, that is worth pricing against the other options.

Step 4: Put a trained person where the risk is

Every layer above still depends on someone noticing. A guard at the right place does three things hardware cannot:

  • Applies judgment. A guard can tell a lost contractor from a pretext and can handle the awkward conversation that employees avoid.
  • Verifies identity. Checking ID against an access list and calling the host is a control no turnstile provides.
  • Responds and documents. When something is wrong, there is a person to escalate and a report to write.

Where does a guard add the most value?

  • A lobby or reception entry with mixed visitor, tenant and delivery traffic.
  • A warehouse or dock door, where drivers, pickers and visitors cross paths. Our guides on warehouse access control and distribution center security cover how these layers fit together.
  • A school’s main entrance, where an adult checks visitors before the second door opens.
  • A community or apartment entry, where residents let others in as a matter of habit. See our planning guides for gated communities and apartment buildings.
  • A construction site gate during deliveries and shift start.

Outside staffed hours, mobile patrols and remote video monitoring can cover the gap, checking doors and gates at intervals and responding to alerts. They do not replace a post at a high-traffic entry. They fill the hours a post cannot.

Whether a guard should be armed or unarmed depends on your risk assessment, your insurance terms and your contract. For most entry-control posts, the main job is verification, observation and reporting, and an unarmed officer is a common fit. Discuss it with your provider and your insurer.

Step 5: Record, review and adjust

The last layer is the one most sites skip. Without a record you cannot tell if the plan is working.

  1. Log events. Each tailgating incident, near miss or propped door gets a short entry: time, location, what happened, who responded.
  2. Review weekly or monthly. Patterns show up fast. A single door with repeated alerts usually has a flow problem, not a people problem.
  3. Feed it back into training. Use real events, anonymized, rather than generic examples.
  4. Test the response. Confirm that an alert reaches someone who can act on it, at all hours you operate.
  5. Re-assess when operations change. A new shift, a new tenant or a new dock schedule changes who is at the door.

Clear reporting is part of how a guard program should be run. At GuardEX, accountability comes from reporting, technology, on-site officer training and ongoing support, which is how we approach every site plan.

Choosing across entry points: a worked example

Take a 150,000 square foot distribution building in New Jersey with one employee entrance, one visitor lobby, six dock doors and a truck gate. Here is one way the layers might be assigned, as an illustration rather than a prescription:

  • Truck gate: a guard checks drivers and records arrivals. Gate control keeps a second vehicle from following.
  • Dock doors: doors alarmed for held-open conditions, cameras covering each door, a written delivery procedure, and a patrol or remote monitoring check during off-hours.
  • Employee entrance: a turnstile or equivalent single-person control, with camera analytics flagging two people on one badge.
  • Visitor lobby: a guard or receptionist verifies ID before any badge is issued, and visitors are escorted.
  • Office and inventory cage: badge-controlled doors with door-held-open alarms, and a short list of authorized staff.

A gym, a members club or a similar facility would run a lighter version of the same logic, with entry tied to membership records. For that case, the approach to sports club access control shows how entry can be linked to member data. Different property types need different mixes, which is why a single product list is a poor starting point.

Common mistakes

  • Buying hardware before mapping traffic. A mantrap at a door with 200 people per hour creates a queue, and people start propping doors.
  • Relying on deterrence alone. A visible barrier without anyone watching it is only as good as the next polite employee.
  • Forgetting contractors and deliveries. Policies often address employees and ignore everyone else who comes through.
  • Ignoring fire and accessibility rules. Any change to an entrance needs sign-off from the right official.
  • No review loop. Alerts that no one reads create paperwork, not protection.

How GuardEX can help

GuardEX is a locally owned security company in New Jersey. We provide armed and unarmed security guards, mobile patrols, remote security monitoring, video security systems and access control systems. We build each plan around the property’s own risks and operations, so an entry layer for a school lobby looks different from one for a dock door.

If you are reviewing entrances at a New Jersey property, start with a walk-through of your entry points and traffic patterns. You can reach us through the GuardEX website to talk through where guard coverage, monitoring and access control fit together on your site.

FAQ

What is the difference between tailgating and piggybacking?

In physical security the two terms are used almost interchangeably. Both describe an unauthorized person entering a controlled area behind someone who is authorized. Some organizations use “piggybacking” when the authorized person knowingly lets the other in, and “tailgating” when the person slips in unnoticed. Your policy should cover both.

Is a mantrap better than a turnstile?

Neither is better in every case. A mantrap isolates one person at a time and suits sensitive rooms and school visitor vestibules, but it is slower and needs space. A turnstile keeps traffic moving and suits lobbies and perimeters, and it works best with someone observing it. Match the device to the risk and traffic at each door.

Do I need a guard if I have access control?

Access control decides who is allowed in. It does not always tell you whether two people came through on one credential, and it cannot challenge someone. Security Magazine notes that entrances built only to deter need manned supervision. A guard at high-traffic or high-risk entries covers that gap, and patrols or remote monitoring can cover off-hours.

Can tailgating be completely eliminated?

No control guarantees that. Layers reduce the opportunity and make events easier to see and document. A clear policy, the right hardware at each door, cameras that count people and a trained person enforcing the rule together give you the strongest practical position.

Are there New Jersey rules that require anti-tailgating measures?

The guidance in this article is general, and we are not citing a New Jersey law that requires a specific anti-tailgating device for private properties. Fire code, accessibility rules, school security requirements and your insurance terms can affect what you may install, so confirm those with the local code official, your counsel and your insurer.

Sources

Get CoverageRequest Call Back

This Website uses Cookies

We use optional Google Analytics cookies to understand which pages and lead paths are useful. Names, contact details, form answers, and chat transcripts are not sent to Analytics.

Review Privacy Policy
Tailgating Prevention: A Layered Plan for NJ Properties | GuardEX Security Services